The first load of panels comes off the forklift.
Mark taking over the fork lift.
The first load that Mark took from the semi.
Mike and Ben lifting panels on to the fork.
Setting down the panels on to the pallets.
The last load of panels.
Setting down the last load of panels.
All of the panels and Styrofoam.
The Munn Lumber truck with the wood for the basement, and the first floor floor.
Mike and Mark lining up the sill plates so they will go on smooth.
Mike and Mark final putting on the sill plates with the Styrofoam and pl400 glue.
Counter sinking the holes in the sill plates to the j-bolts will fit.
Finally putting together the first walls.
Ben sitting doing nothing.
Mike and Grandpa cutting studs.
Mark, Tigon, Mike, Grandpa, and Ben in the hole measuring.
Mike and Grandpa cutting.
Mike, Mark, and Ben putting together a wall.
Four men in the hole with one girl.
Tigon cutting the board for the door.
Four men in the hole.